Tag Archives: stone sculpture

Practice piece/ Übungsstück

I’m far from Granite country, ladies and gents. Out here in Germany, they most carve sandstone. There may be work for me in the future, but first I have to show that I can also carve sandstone like they do in the old country.

This piece is being done entirely by hand (no pneumatics or angle grinders) and without pointing. It’s not exact, it’s not as accurate as I’d like it to be, but it’s been a great learning experience. Sandstone is a delight to carve, and is very much like modeling in clay, as opposed to the uphill battle that is granite carving.

 

The stone I chose wasn’t big enough to fit the entire body of the dophin, and I didn’t want to do the extra work of measuring to make a half size version so I could fit the entire body into the stone. In hindsight, that may have been easier and more beneficial… the version I am making now is the dolphin coming out of the water, without the fin on his back.

Hopefully I get this done before I bounce to Thailand for the winter!

 

 

It’s getting dark much earlier these days, and by the time I want to take some photos at the end of the day it’s dark already. The hold doesn’t help me hold the camera steady, either… here is the practice piece with the model I am loosely working from. It’s a kind of baroque dolphin that you would see in Italy — in fountains, door handles, belt buckles, etc. Not much like a dolphin at all, aber ist einfach so.

This is still very rough. Lot of work to go, but I love how fast things can go once you know what you want. I am not really at a point where I can fluently make observations and then go to the right chisel to get what I want. It’s trial and error until the owner of the shop comes by and say, “What the hell are you doing? You do it like this…”

The chisels that one uses for sandstone are very different from the chisels for granite. They are all very thin and sharp, and you never pound the stone directly. It’s more like modeling with a rake tool in clay. You might notice that some of the surfaces are pretty smooth. That’s because I have no idea what I am doing and I wanted to try out the flat chisels. I know now that the entire sculpture should be covered in rake marks (the striped pattern on the back created by a 4 toothed chisel) until the very end.

After showing the pictures to Jerry from Barre  he reacted with a similar, “what the hell are you doing?” but after the initial wave of criticism he softened up and said I should make the scales rounder, and pop in the eye so I know what I’m doing. So here’s where I’m at now.

Of course, Jerry was right. The rest of the piece seems to make more sense now. Next on the list is the lips and teeth, the I will probably finish up with smoothing out the back and doing the rest of the scales.

So this is the start of my first piece in sandstone. I have really enjoyed it, and learning about new tools and techniques. More to come later on!

Advertisements

Steinrestaurierung Hoferick: Deutsch Amerikanische Freundschaft

Dialog der Kulturen

Ein Amerikanischer Steinbildhauer interviewt einen Deutschen Steinbildhauer.

SW: Sean Williams

Wie bist Du zu deinem Beruf Steinbildhauer gekommen?

A: Andreas Hoferick

Mein Vater geriet im Kalten Krieg zwischen die Fronten und wurde 1972 beruflich passiviert. Daraus erwuchs in mir der Wunsch beruflich etwas ganz Anderes zu werden und die musischen Ambitionen meiner Mutter führten mich zur Bildenden Kunst. Die lange unfreiwillige Kindheit in der DDR und sozialistische Erziehung gegen die ich mich früh genug positioniert habe und deshalb nicht an den DDR-Kunsthochschulen studieren durfte, führte zu einem ausgeprägten alternativem Denken. Deshalb auch der Umweg über eine Bergbaulehre im Kupferschieferbergbau (Lehrling im Bergbau) . Danach begegnete ich auf meiner Suche nach einer Bildhauerwerkstatt dem Steinbildhauermeister J. Klimes in Berlin. Er war Leiter einer Klassischen Bildhauerwerkstatt mit 27 Kollegen und vermittelte historisches Handwerk in der Steinbildhauerei. Kulturell und alternativ orientierte Menschen hatten in der DDR lediglich in einer Nische eine Überlebenschance. Und für mich bot sich diese Gelegenheit in der Werkstatt Klimes. Isoliert von der Welt, konnte ich mich in 11 Jahren Anstellung den Klassischen Stein-Skulpturen widmen, die es zu rekonstruieren galt, denn durch den II.WK waren in Berlin hohe Verluste entstanden.

 

SW: Wie und wann ist Deine Werkstatt gegründet worden?

A: Als die Werkstett Klimes 5 Jahre nach der „Maueröffnung“ in dem Neuen Wirtschaftssystem nicht mehr überlebensfähig war entschloss ich mich 1995 mit 3 weiteren Kollegen eine kleinere Werkstatt auszugründen und ich fand Anschluss an des Kollegium der Restauratoren Berlin welches eine freie Assoziation von Restauratoren im selben Stadtbezirk Weißensee war und ist. Von 1989-1993 studierte ich an der TFH – Wedding Steinrestaurierung, so kann ich meine  Steinbildhauerischen Arbeiten unterstützen.

15 Jahre lang (1995-2010) ist es mir gelungen die Werkstatt Hoferick in demselben Stil wie die Werkstatt Klimes weiterzuführen, allerdings nur noch mit 7 Mitarbeitern.

SW: Welches war das Projekt mit der interessantesten Herausforderung für Dich und warum?

A: Pferdeportraits sind noch vor den Kolossalskulpturen wie z.B. der der „Caritas“ welche eine Größe von 5,70 m besitzt, eine besondere Herausforderung. Abgesehen von meiner unbefangenen Entdeckung, dass Pferde Fabelwesen gleichen, ist die Skulptur eines Pferdes wohl das Komplizierteste was einem naturalistisch arbeitenden Bildhauer begegnen kann.

 

SW: Wie ist Deine Werkstattphilosophie?

A: Skulpturen oder Ensembles zu schaffen, die der vermeintlichen Kurzlebigkeit unserer Zeit widerstehen. Wir kreieren die historische Zukunft in unserem Metier: Steinbildhauerei

SW: Wie sieht die Zukunft für Dich aus?

A: Was ich als nächstes machen will ist meine KUNST in anderen Ländern und Kulturen bekanntzumachen und an den in der Kunst bisher üblichen Selbstdarstellungen vorbei zu agieren. Z.B Themen anderer Kulturen aufzunehmen und in einem kulturellen Dialog bildnerisch darzustellen.

English:

SW: How did you become a Stone carver?

 A: Andreas Hoferick

In the cold war my father operated between the two fronts and was occupationally passified in 1972.  From then on there grew a desire to become something completely different and my mother’s musical ambitions drove me to fine art. The long restricted childhood in the DDR and socialistic upbringing, which I had been against early on and thus didn’t allow me to study in the DDR fine art colleges, lead me to an distinct alternative route. I began with the indirect route of becoming and apprentice in a copper mine. Afterwards during my search for a scupture workshop I came across the Stonecarver J. Klimes in Berlin. He was the head of a classical sculpture workshop with 27 co-workers and subcontracted historical works of sculpture. Cultured and alternatively oriented people in the DDR’s only chance to survive was finding a Niche. The workshop of J. Klimes offered me this opportunity. Isolated from the world, I was able to dedicate 11 years of employment to classical stone sculpture intended for reconstruction, and the many losses of WW2 in Berlin provided ample work.

 SW: How and when did you establish your workshop?

A: When Klimes’ workshop was no longer viable in the new economic system 5 years after the ‚opening of the wall’, 3 other colleagues and I resolved to start up a small workshop and found connections in the College of Restuaration Berlin which is a free association of conservators in Weißensee. From 1989 to 1993 I studied stone conservation at the TFH-Wedding (University of Applied Sciences), which supports my work as a stone carver. For 15 years I successfully ran the workshop Hoferick in the same fashion as the workshop Klimes, if only with 7 co-workers.

SW: Which was the project with the most interesting challenge for you, and why?

A: Horse portraits, even in comparison to collossal sculptures like „Caritas“ which is 5.7m tall, are especially challenging. Irrespective of my naive observations, the horse is that of a myth, and the form of a horse if definitely the most complicated form that a figurative sculptor can come up against.

SW: What is your workshop Philosophie?

A: To create sculptures or compositions, that withstand the professed humanity of our time. We create the historical future in our profession: Stonecarving.

SW: What do you have in mind fort he future?

A: What I want to do next is to make my art well known in other countries and cultures, and to work past what has been traditionally called self-expression in art. For example: taking up themes of other cultures and expressing them in a visual cultural dialogue. Stone carving is an age-old tradition in which every person doesn’t have to think of within a specific epoch or culture and in times of such global thinking it is important to foster a continuation of these skills.

 

Fotos mit freunchliche Genehmigung von Andreas Hoferick

Photo provided courtesy of Andreas Hoferick